- Coupling laterally removable
- Convenient mounting and dismounting with split hubs
- Standard lengths up to 6 m
(19.68 ft.)
- No pillow block bearing required
Design:
Balanced split clamping hubs with two radial
clamping screws ISO 4762
Intermediate tube section supported by gimbals within the bellows.
Temperature range:
-30 to +120° C (3.6 F to 270)
Backlash:
Absolutely backlash-free.
|
Service life:
R+W Line Shafts are maintenance-free and have a infinite life, if the tolerances are not exceeded.
Fit tolerance:
On the hub/shaft connection 0.01 to 0.05 mm.
Material:
Bellows made of flexible stainless
steel Aluminum intermediate tube section through
size 150, size 300 and up have a steel tube.
Optional composite CFK tube for high speeds.
Clamping hubs through size 60 Aluminum, size
150 and up have steel hubs.
Non-standard application:
Custom designs with varied tolerances, keyways,
non-standard material and bellows are available upon request.
Technical Data:
- rated torque from 10 - 800 Nm
- shaft diameter from 5 - 72 mm
|
 |
