- axial hub mounting with
- expanding shaft
- very smooth running
- high clamping forces
Design:
Two coupling hubs are concentrically machined with concave driving jaws.
One side with clamping hub and a radial screw ISO 4762.
One side with an expanding shaft and tapered clamping element Suggested
bore tolerance for the driven shaft: H7.
Temperature range:
The temperature range depends on the choosen Elastomer insert.
Torsional stiffness:
Depends on the Elastomer insert.
|
Speeds:
See
table of Elastomer Coupling EK7. Over 4,000
rpm a finely balanced version is available.
Fit tolerance:
On the hub/shaft connection 0.01 to 0.05 mm.
Material:
Clamping hub: up to series 450 high strength aluminum, from series
800 and up steel.
Expanding shaft & cone: steel.
Elastomer insert: precision molded wear resistant and
thermally stable polymer.
Non-standard application:
Custom designs with varied tolerances, keyways and non-standard material are available upon request.
Technical Data:
- rated torque from 2 - 2,150 Nm
- shaft diameter from 4 - 80 mm
|
 |
